Want this question answered?
Under the front passenger seat
a Phillips head screw driver
the bearing is one non-dissasemblable unit, it has to be pressed out and in. best done by someone who has the right tools.
under the front driver seat
www.autozone.com
which intake? They're are both at the front under the bonnet
how do you replace the front rotors on Toyota Land Cruiser
Toyota Previa fuse box is located underneath center console. It has a latch mechanism holding it in place at front of console but can be pried up with flat edge screw driver.
Jack location for Toyota PreviaToyota Previa jack and tire iron are located under front passenger seat. Access from front on door side. It is held down with a butterfly screw and/or rubber retaining band. Easy to get out.this is on most united state previa,most European made previa the jack are locate under the driver seat.
Try and get someone to read the ECU codes, that will tell you if the problem is from the "Knock Sensor". If it is you will need to buy a new one and replace it. They are very expensive and can only be got from a Toyota Dealer. To fit your self Drill a hole under the front seat(Directly above the sensor) and replace from there. If you dont want to drill a hole you will have to drop the engine and that is not a cheap option on a previa.
trouble putting right front signal bulb in.
please tell me how may I change the bulb on the left turn signal on a Toyota corola wagon 1993