pull off the front wheels. remove the calipers. remove the two screws that hold on the rotors. replace the rotors and reverse the procedure.
they have to pressed out from a machine shop.
The minimum brake rotor thickness for the front and back rotors on a 1992 Honda Accord is 21mm. Rotors which are below this thickness will not offer adequate or reliable braking.
take brakes off and calipers off, next rotors should come off easily.
How to replace left front door actuator on a 2005 honda accord hybrid
In some Honda's, you have to pull the axle shaft in. That may mean some disassmbly of the front end.
Most Honda's require that you pull both axle shafts IN, which means some major disassembly of the front suspension. You'll need a front end alignment after you're done.
Is it the back one or is it the front one...?
It is about $300 to $350 in Flushing NY
too much
Front studs on a 1999 Honda Accord are pressed in. First the studs must be removed using a hammer or press. Once remove each stud can be pressed in.
how do you replace the front rotors on Toyota Land Cruiser
Most Honda brake rotors require a large slide hammer as they are not only pressed onto the hub, but also rusted which makes it very hard to remove. This may well require an experienced technician.