0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Your heater stays on hot continuously any ideas?
replace the heater temperature switch
How do you replace the heater switch in a 2002 s10 truck?
Pull the front dash bezel out that surrounds the cluster and the radio and the a/c-heater controls out and then remove the controller and replace the switch.............
What would cause heater quit working on 1977 Chevy Camaro?
Check fuse if the blower is not working. If it is then replace your heater core. if its not then replace your fan switch.
How do you replace heater blower corsa D?
The heater switch can be replaced on a Chevrolet Corsica by removing the three wires from the back of the switch. Put the wires onto the new switch and return it to its slot.
What is wrong if you replace the heater switch but the heater continues to only blow on the 3rd click and nothing else?
The relay is bad.
How do you replace the heater switch in 2003 Pontiac Grand Prix?
Need a little more info on what your trying to replace. Is it the switch in the dash? It's in the overhead console.
How do you replace heater blower fan switch on a 1997 Toyota RAV4?
take the old switch out, put a new one in
Why will the heater in a 1996 Grand Am with 4 pos heater switch not work on HIGH but it works in all 3 other positions?
Your heater switch may not need to be replaced. The heater high position is controlled by a fuse under the hood. Until you find the fuse and replace it, your new switch will not work. JRR.
How do you change to lamp bulb on seat heater switch on a Honda odyssey 2005?
light out on the seat heater switch on passenger side. High low indicator is ok. How do you replace bulb?
How do you remove the inhibitor switch on a ef falcon?
how to remove inhibitor switch on ef falcon
2001 echo heater fan only has high speed is it the motor or switch?
It is the resistor, replace it.
Why does the heater blower switch get hot?
As heater motors age, they tend to draw more amps than they should. Yours is probably drawing too much amperage causing the switch to heat up. Remedy is to replace the heater motor and possibly the switch as the terminals get hot and oxidize.
