First, if you are speaking of the high pressure Power Steering hose, you just need to unbolt the old and replace it, then replace the fluid.
If you are referring to the High Pressure Air Conditioner hose, you will need specific tools. You will need a way to capture the Freon from the a/c system so it can be recycled properly. You will need a seal kit for the new hose. You will probably need to get a new "dryer" assembly because when you unbolt the old hose, the dryer sucks moisture out of the surrounding air and the moisture cannot be removed. Either scenario,,,,get an Haynes Manual(Auto Zone, NAPA-~$25) and the procedures are in there.
how hard is it to replace a water pump on a 1998 chevy venture van?
Just had it done on my 1998 Venture - It cost about 900.00
you have to take out the fuse box, then take out the bar , then you can take out the battery.
no- 1998-2000 Chevy Venture vans only have a relay for the fuel pump and no fuse.
On a 98 venture the starter is located in front and just under radiator. Simple to reach and change. I learned the hard way.
buy a repair manual at any parts store and it explains it step by step
under the car engine, between the oil filter and the starter
The wiper motor on a 1998 Chevy Venture is up under the vents next to the windshield. It is bolted to the firewall.
There are two fuse boxes on a 1998 Chevy Venture. One is located under the dash on the driver's side, and the other is under the hood.
5w30 or 10w30
It is built into the multifunction switch which controls your signals,high beams,cruise,etc...have to replace entire unit.
what is the coil firing order on a 1998 chevy venture van with a 3400 engine?