Want this question answered?
how do i replace the hub assembly on a 1997 cavalier 2.3 Ls
The wheel bearings are not really replaceable by themselves. This is because they are integrated into the hub assembly. So the answer is that you will have to replace the entire hub assembly to replace the bearings.
The front bearing for a Dodge Stratus is attached to the Hub. To replace it remove all the components on the hub assembly. There are three bolts that hold the assembly in place. Loosen the bolts and pry out the hub. Replace the unit.
the same way you would replace any hub assembly, take the wheel off, take off any bolts that connect the hub to the driveshaft and then replace it
Front is easy, just replace hub rear is pressed in
It's easy, you have to replace the entire hub!When the bearings go bad, you have to replace the whole hub! Simple! It's easy, you have to replace the entire hub!When the bearings go bad, you have to replace the whole hub! Simple!
You can replace both... Bearing or Hub... Bearings are cheaper, but harder to find and replace. Hub assemblies are easier to replace, but slightly more expensive.
YOU HAVE TO TAKE THE HUB ASSEMBLY OFF AND HAVE A SHOP PRESS THE BEARING,OR REPLACE THE HUB ASSEMBLY FROM A SALVAGE YARD.
you have to replace the wheel bearing hub assembly look up a picture and you will see the bolts are attached to the hub assembly.
With a Hammer
they are part of the hub assembly
youll most likely have to buy the whole hub assembly. I had to do that to my 94 dodge dakota.