0
What else can I help you with?
How do you replace a wheel berring on an Oldsmobile regency 98?
how do you replace a wheel bearing on an 1985 oldsmobile regency 98
How do you replace a wheel berring on an 1985 Oldsmobile regency 98?
how do you replace a wheel bearing on an 1985 oldsmobile regency 98
What is the bolt pattern for a 1984 Oldsmobile 98 regency?
The bolt pattern for a 1984 Oldsmobile 98 Regency is 5 bolts with a distance of 4.75 inches (120.65 mm) between the bolts. This is a common pattern for many vehicles from that era. The wheel size typically used is 15 inches in diameter. Always verify with specific vehicle documentation or a professional to ensure compatibility.
How do you change the harmonic balancer for 1989 ninety eight Oldsmobile regency?
take off the right wheel and the cover wall and you wll see it
How do you replace struts on 92' old 98 regency elite?
To replace the struts on a 1992 Oldsmobile 98 Regency Elite, start by safely lifting the vehicle and securing it with jack stands. Remove the wheel, then detach the strut assembly by loosening the upper strut mount bolts and the lower bolts connecting the strut to the steering knuckle. Replace the old strut with a new one, reattach the bolts, and ensure everything is tightened properly. Finally, reassemble the wheel and lower the vehicle back to the ground.
How do you change the wheel bearings in a Oldsmobile Alero?
I have changed two of them. Remove the caliper, brake disc and then the large nut at the wheel and then you will have to use a small sledge to pound the the thing that the nut is threaded onto back and then loosen the bolts to the hub
Can 22s fit on a 1996 Oldsmobile 98 regency?
Fitting 22-inch wheels on a 1996 Oldsmobile 98 Regency is possible, but it requires careful consideration of several factors, including wheel offset, tire size, and suspension modifications. You may need to make adjustments to avoid rubbing against the wheel wells or suspension components. It's advisable to consult with a professional or a wheel specialist to ensure proper fitment and safety.
How do you replace the wheel bolts on a 2004 Hyundai accent?
if the bolts do not get on then you just have to change the studs
What is the standard wheel size for a 1992 Oldsmobile 98?
Look on the drivers door jam. Tire size and wheel size should be there. I have a 1992 98 regency and the tire size is P205/70R15. Rim size is 15x6.
How do you change a wheel hub on a Chevrolet optra?
Remove the rear wheel, then the wheel hub should be on four bolts. Remove the bolts and remove the hub. Very easy job.
Do 89 olds regency have steering wheel airbag?
no it does not have a steering wheel
Change a tire on a 1999 Chevy prizm?
to change the wheel and tire on a car just loosen the bolts on the wheel jack it up and replace it
