Start with removing the door panel.
Now you can see the specific connection from the handle to the linkage.
See "Related Questions" below for more
I don't know how to do it, but the dealer is charging me $2075.00 to replace it on my 2000 Windstar!
The handle is the only way to open the hatch (trunk?) on a Windstar. There is no inside button for it like in a sedan like a Taurus.
where is the #5 injector? how long does it take to fix
Remove Door Panel. Peel Back Water Barrier. Unscrew latch. Remove two bolts holding the handle inner to the handle bezel(outer). Remove the Anti-Theft shield with force. Remove handle. Reverse Process
Umm, short answer, no. Two completely different transmissions, controlled in two completely different ways.
Its on youtube
where is the tcm in a windstar 2000 located
1200 to 2000 - our went out some years back was about 1600 for whole job.
You can't - well, you can.. but the front bumper cover and the grill are all one piece
To install an exterior door handle on a Cherokee Jeep, first remove the window crank handle and the three screws in the inner door trim panel. Second, remove the inner door panel from the door using a trim stick and take off the vapor barrier inside the door. Third, remove the nut on the rear of the door handle, position the exterior door handle, and secure in place.
Probably dirty contacts in the switch.
where is air flow relay on 2000 ford windstar