I need to replace my outside handle on the drivers door. Toyota told me to go on line to see a diagram. But, where? It is a 2000 camry.
= How do you replace the driver's side Inside door handle on a 2004 Toyota Camry? =
You have to remove the door panel to access handle screws. After that you have to disconnect pulling rods and replace the handle with another one.
I have a 2000 Toyota camery that the drivers door handle on the outside broke - not an easy job, the door must be taken a part, and there are screws you don't see that must be taken out so the handle come out. Do yourself a favor, take it to a mechanic who knows Toyota cars, or you will end up with more problems then just a handle.
= outside door handle on a 1997 Toyota Camry. =
You can replace the inside drivers door handle by removing the door panel. With the door panel removed the door handle mechanism will be visible. Remove the linkage from the door handle. Remove the door handle retaining bolts. Reverse the process to install the new door handle.
the part costs about $38
Its on youtube
Remove the door trim panel. Remove the inside door handle rod. Remove the inside door handle retaining rivets. Remove the inside door handle from the door by sliding the handle rearward.
Replacing the door handle on a 1997 Toyota Camry is easy with the proper tools chief among which is your check book. Start by going to the nearest Toyota dealer. The rest will fall readily into place.
Remove the inside door cover. The handle is attached on the inside of the outer door panel. You must remove all of the lock and mechanism linkage to remover the handle. It's pretty tricky but take your time and you will be fine.
Yes, you should be able to do that.