Want this question answered?
near the fusebox (drivers side interior)
You don't. The switch is all one , you will have to replace the entire switch.
just replace it this switch might also be the boo switch that sends the signal to the computer
Why are you replacing the switch? If the fan works only on high speed, replace the fan resistor. There was a TSB for this.
If your referring to the emergency flashers.... it'snactually in the turn signal switch. i have a 94 mercury cougar xr7 and when i bought it the emergency flashers did not work. i in the end i had to replace the entire turn signal switch in the steering column.
In the trunk on the drivers side in the corner fender skirt under the interior carpet.
How do you install a stop light switch on a 1972 cougar
you have a short in light switch replace light switch
Go to http://www.cougardb.com/howtoshow.php?howtoid=2
get a pocket knife or something sharp and pry up on switch, it just pops up then unplug wire and replace switch then push down to reinstall switch very simple as I just put in 2 of them in less than 5 mins.
how can you start a '89 mercury cougar with a broken ignition switch?
On a 2001 Mercury Cougar : The fuel pump shut off switch ( inertia switch ) is located in the drivers foot well behind the kick panel ( there is an access hole ) * the kick panel is the interior trim panel , in front of the front door , beside the persons feet