Want this question answered?
Vehicle Scid Control
You have light bulb that is burned out at the back of the vehicle.
low tire pressure
Remove the center piece of trim on the inside of the lift gate. it just pulls off. then push up on the two tabs at the bottom of the light to remove it. then replace bulb with the correct bulb. .....
The brake light assembly can be access through the cargo compartment. Remove the cover to the brake light assembly. Take hold of the brake light connector, push in and turn at the same time. The brake light will come out. Reverse the process to install the new brake light.
Follow the link below, labeled "How to replace a Lexus IS300 tail light"
How do I change the license plate bulb on a 1993 Lexus ES 300
how do you replace license pate light on 2006 pontia g6
Lexus RX300 brake light bulb lamp replacement procedure: Purchase the correct replacement brake light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement brake light bulb information. Then consult your owner's manual for the replacement procedure. As simple as it sounds, the owner's manual is the best place to start for brake light bulb lamp replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
The brakelight sensor is located on the brake switch, which is on top of the brake pedal and held on with a 14mm jam nut.
The license plate light on a Lexus may turn on and off if there is a loose wire. Try wiggling the wires around and see if the light goes on and off. If it's not a loose wire then the light bulb may have come loose and needs to be tightened.
no you do not