I purchased a used 1999 Chevy Malibu and had to replace the glove box because the latch was broken. I purchased another a the local salvage yard and I want to know how to take the lock out of the old door and install it in the new one.
The cylinder should not be worn out on a 99 car unless you were using a very heavy key chain. I would just replace the ignition switch if the cylinder works OK. You also might try some Graphite lube on the cylinder.
You need to replace the Distributor cap and rotor. Be sure that the coil wire is not WHITE or RUSTED on the ends were they go in the cap and coil, If they are then replace the COIL and the plug wires too. Just be sure that you use Factory Parts not after market.
No, not if it is not defective. If the ignition switch is defective then that is all you need to replace.
Because something on that supply line has a problem
Remove wiring harnesses, unbolt it, remove from engine. Install new alternator, apply tension using bar, bolt it, hookup wiring harnesses.
You cant, go to the junk yard or eBay
How to replace a window and regulator on a 1998 checy malibu?
Yes
How do you replace a cigarette lighter in a 1999 Malibu
Chevy did not build a Malibu in 1995.
Preferably w/o a cig in your mouth!!
What is the best motor oil to use on a 1999 Chevy Malibu?
The head gasket on a 1999 Chevy Malibu is replaced by removing the coolant, intake manifold, and retaining bolts. The cylinder head can then be removed, the gasket replaced, and everything reassembled.
My 1999 Chevy Malibu has a fuse box under the front hood,
how to replace water pump on a 1999 chevy malibu 2.4
no
Drain the oil from your 1999 Chevy Malibu oil pan. Remove the oil pan retaining bolts. Remove the oil pump retaining bolts. Reverse the process to install your new oil pump.