Remove four bolts that hold transaxle remove belt pulley and belt guard. remove shift linkage remove spring tensioner. then remove whole transaxle. Remove four bolts that hold transaxle remove belt pulley and belt guard. remove shift linkage remove spring tensioner. then remove whole transaxle.
To swap an engine on a Murry riding mower, it is important to make sure that the new engine is the right match for the mower, by checking the model number. You also need to make sure that the bolt holes line up, so that it will fit safely. Remove the old engine, and then replace the new engine, tightening all the screws and bolts in the reverse order that you followed to remove the old engine.
It's coded in the model #.
sae30w
counterclockwise
You may have a hot wire grounding out somewhere
10w30 or 10w40 seem to work well.
20oz which is LESS than a quart of oil.
Not sure what you mean by "idle funny". If you mean the engine revs up and down while it is idling, the problem is most likely a dirty/clogged air filter.
Your flywheel key might be sheared
Andy Murray is from dunblane, just type it into a search engine!
Murry Dickson's birth name is Murry Monroe Dickson.
HOW TO CHANGE THE CUTTING HEIGHT To change the cutting height, raise or lower the lift lever as follows. 1. Move the lift lever forward to lower the mower housing and back to raise the mower housing. 2. When you ride on a sidewalk or road, move the lift lever to the highest position and move the blade rotation control to the DISENGAGE position.