Want this question answered?
How do I take the oil pan off The oil pump is on the front of the engine behind the main pulley on the Crankshaft, behind the timing belt. NOT in the Oil Pan.
Above the oil pan, you need to take of the timing belt, timing belt rear cover, then the oil pan.
how do i bleed the oil pump on a 85hp suzuki outboard
inside the oil pan.under a cover.
Remove the oil pan, remove the pump, and replace it.Remove the oil pan, remove the pump, and replace it.
because your oil pressure is not right. either replace the oil pressure sensor or the pump.
how do you replace the oil pump
You must remove the oil pan to access the oil pump. It is simple to replace once you get to it.
there will be a bolt on the right side by the water pump. take that bolt out and drain then fill it up till oil comes out the bolt..
Could you tell me how would you replace the oil pump on a Mazda Protege?
You need to follow the same procedure as for timing belt replacement. But in the case of the oil pump you have to remove the oil pan too. There is a strainer attached to the oil pump from the bottom you will have remove it too. Then replace the oil pump, make sure that you have replace the oil pan gasket, and oil pump gasket.
All of them! It involves removing the engine and then pulling the oilpan.