Want this question answered?
What have to do replace the belts water pump power steering
Take off the belts then the hoses then the belts holding it on.
I belive it has two belts one that drives the fan and one for the alternator the adjuster for the fan is on the right side and you need a 12 or 14mm socket and use a 14mm long wrench or socket and ratchet to move the tensioner
It is very hard to do but you will need a 12mm socket for the alternator and a long 12mm wrench to loosen the bolts on the other pully and a 10mm Allen wrench to adjust the A/C belt
the amount seat belts depend upon the amount of people that fit inside of a four seater hatch back therefore two people are in the back two are in the front and six people are in the ash tray....hopes this helps ;)
very carefully
there are 3 belts the alternator and power steering belts can be accessed from the top right sideloosen the adjustment bolts. the a/c belt is easier with car jacked up from underneath, remove the right plastic splash pan.
You do not have to re-time your belts to replace the starter.
AC, alternator, power steering, and timing belts.
how do you replace the belts on a l-1011 fan jet
BeltsYes, you must remove all of the belts to replace the alternator belt. The compressor belt first, then the power steering belt then the alternator belt.
Yes, if you drive with the power steering empty of fluid and the motor locks up, it can actually rip the belt from the motor. You can damage belts and the steering motor if you drive with the power steering empty.