Window motor and regulator are found inside of the door panel and may be bolted or riveted in. Should be bolted. Disconnect the window from regulator, take out reg. and motor, then disconnect regulator from motor, reconnect new motor to regulator, reattach those inside of the door, then reconnect the window to the regulator, put it together and see if it works.
how to replace1994 grand drivers side power window motor
for what car? 2000 gm s15
How do you remove and replace the motor for the drivers side power window in a 2000 Sienna
Buy a chilton's or haynes maintenance manual. They tell you everything. I had to replace my drivers side window motor. Not too hard.
replace the power window motor inside the door. You will have to drill out the rivets and replace with nuts and bolts
First... get a repair manual. Follow the instructions...
you need to replace the window master switch
video on how to replace window lift motor on j30
Replace the window regulator, it may come with the motor.
The window is not off track. The window regulator is broken. In most cases you will have to replace the window motor and regulator as an assembly.
Remove the door panel and unclipped the three plastic retaining tabs that hold the window motor in place disconnect wire connector and it's out
How to remove the window motor from the regulator