Step 1. Acquire a Haynes manual for your year make and model.
Step 2. Read all of Section 10 and see if there are other small jobs like bushings and struts that you can replaced while you have everything apart. Maybe you'll notice a way to do it faster too!
Step 3. Ensure you have all the tools to get the job done as well as the parts
Step 4. Execute Section 10-17 'STEERING GEAR - REMOVAL AND INSTALLATION'
NOTE: Check with your local dealer and give the service department your V/N and they will tell you what rack and pinion you need as they vary;
SBA - Standard Steering
SBP - Performance Steering
SBC - Speed Proportional Steering
(Your vehicle will only support 1 type of rack)
Budget 3.5 hours if you know what your doing and 5-7 if you don't.
I just did all this research today for myself and noticed it was really hard to find so I hope this helps some people!
Good Luck!
Ryan
Approx. 1,200.00
No
Yes.
A 2000 Chrysler 300m does not have a heater valve. The cabin temperature is controlled by airflow doors.
no
Chrysler does not have reset switches.
the 300M if it has the hemi engine.
Either have him replace it or get a second opinion.
V6V6
Belt
I recommend going to this site for all your Chrysler 300m questions. www.lhforums.com Any name brand 5w30
DOT3 or DOT4