1) Jack the car and secure with jack stands.
2) Remove the tire.
3) Remove the two nuts that are on the top of the shock. This secures a plate that holds the top of the shock.
4) Remove the bolt on the bottom of the shock. Note: one side of the bolt is welded to the shock and does not have to be held. Removing this bolt is challenging.
5) Compress the the shock to remove.
6) Transfer plate and rubber sleeve to new shock. When removing the top nut on shock, secure the very top of the shock with vise grips.
7) Make sure to remove device that keeps the shock compressed.
8) Compress shock to reinstall. Install top plate to align with bolts. As the shock is decompressing, use screw driver to hold in position to insert bolt on the bottom of shock.
9) Install nuts on top of the shock and tighten.
10) Install bolt on the bottom of shock and tighten.
How do you change a shock on a Peugeot 106 gti
get rancho 5000
It has something to do with the (Electronically Controlled Variable Shock Absorbers).
mabye they "absorb shock!" 2nd Answer: In actual fact, shock absorbers do not absorb shock: the springs do that. The "shock absorbers" dampen rebound (Bouncing). In a bike, the spring is built right around the dampener part.
You have the cartilages in the joints, which act as mechanical shock absorbers. But then you have other functional shock absorbers. You have arches in the foot, which act as shock absorbers. Then when you jump down, you have that spring like movement of the legs. That act as a shock absorbers.
no, shock absorbers are in your knees and back. Some people have flat feet.
$550 in 2004 from a car dealer in Fresno, California.
For a 2004 Ford Ranger : Shock absorbers , front and rear
Yes they are typically, 1992 BMW E36 for say has shock absorbers which are safety measures for accidents. They install behind bumpers to allow a 6" movement in the event you hit something (shock absorbers)
( 2 ) shock absorbers on the front suspension and ( 2 ) shock absorbers on the rear suspension ( and if it's the same as my 1995 Ford Explorer there is a short " shock absorber " that is sideways connected to the rear differential that I didn't bother having changed )
Check your manual but i believe arround 120,000 to 150,000. Mine just hit 150k and i had to replace mine.
The 1995 Buick Skylark is equipped with rear shock absorbers. There will be struts on the front of the vehicle.