Want this question answered?
400 cc Yamaha engine
To replace the clutch plate in a TTR 125 drain the engine oil, disengage the engine skidplate and the starter motor. This is a common issue with this model of Yamaha dirtbikes.
Drain all the fluids in the bike, and you might have to drain motor oil and diff oil more then once.
(2) 10mm screws on the front of the motor. Tke them out and pull out starter, disconnect wire.
no
The starter is held on with 2 bolts. To get to it you take off the exhaust manifold, or pull the engine out of the hull.
FNR transmission or use a seperate sprocket and use a starter motor.
that test indicates that you need to replace the starter motor.if no clicking in this test , you would replace solenoid first. but clicking indicates solenoid works,so replace starter motor
Begin with disconnecting the negative battery terminal. Remove the two bolts that hold the starter in place and also unfasten and remove the starter motor cable. The starter is easily pulled out.
What is the easiest way to replace the starter motor on a 2000 chev Venture?
There are some detailed articles on changing starter motors at ; http://www.carbasics.co.uk
The armature bushings inside the starter motor are probably shot. Time to replace the starter.