There are two bolts holding the starter to the gearbox bell housing and the engine block. One is acessable from the back of the gearbox using an extension and 14mm socket and the other from the side using same. Once undone the starter will slip back and out though it takes alot of manipulation to get it away from the chasis etc.
Well it just cost me $375 to have a starter replaced in a 1990 4Runner. But I think I got totally screwed.
The starter on a 1998 Toyota 4runner is held located on the transmission housing. The starter is held on by 2 bolts which mount it directly it the engine. Remove the two bolts to replace the starter.
where is the starter
A 1991 Toyota 4runner is bigger than a 1990 4runner
The starter solenoid on a 1995 Toyota 4Runner will be found on the starter unit itself. The solenoid is mounted on top of the starter.
Someone has a fantastic answer on the web... http://www.yotatech.com/showthread.php?t=76358
The starter solenoid on a 2002 4Runner can be found on top of the starter assembly. The solenoid is responsible for powering the starter.
You need to replace the starter.
I have an 87 4runner and i had a similar problem turns out that the starter relay sends power to the fuel pump you might want to try replacing that relay
I've replace the starter for a rebuilt and it spins. I know I've removed 2 screw to many. Could it be I've change the adjustment?
how to replace break pads on 2001 4runner
how to replace brake fluid on a 1999 Toyota 4runner