Take it toyour localDealer, it requires removing the entire dash board, and is an expensive project.
To remove and replace the AC evaporator in a 2002 Chrysler Concorde LXI, start by disconnecting the battery and draining the refrigerant from the AC system. Next, remove the dashboard and the HVAC housing to access the evaporator. Disconnect the evaporator lines, unbolt the evaporator from the housing, and replace it with the new unit. Finally, reassemble the HVAC housing, reconnect the refrigerant lines, and recharge the AC system.
To replace the evaporator core on a 2002 Tacoma, start by disconnecting the battery and draining the refrigerant from the AC system. Remove the dashboard and the HVAC unit to access the evaporator core. Detach the core from the housing, replace it with the new unit, and reassemble everything in reverse order. Finally, recharge the AC system and test for leaks to ensure proper functionality.
junk it
How much labor is involved in replacement of an evaporator for a 1999 evaporator
To replace the AC evaporator in a car, first, disconnect the battery and recover the refrigerant using an AC recovery machine. Remove the dashboard and any components obstructing access to the evaporator, including the HVAC housing. Next, detach the old evaporator from the housing, install the new evaporator, and reassemble everything in the reverse order. Finally, recharge the AC system with refrigerant and check for leaks.
how do you replace the ac evaportator
If you need to replace the AC evaporator, it is best to have this done at a dealership or repair shop. Doing this replacement requires draining the refrigerant, which is unsafe to do yourself, and can be illegal.
What all is involved in replacing a a/c evaporator in a '94 Dodge Dakota?
To replace the AC evaporator in a 1997 Toyota Tercel, first, disconnect the negative battery cable and discharge the AC system at a professional service center. Then, remove the dashboard and HVAC unit to access the evaporator. Detach the old evaporator from the HVAC unit, install the new one, and reassemble everything in reverse order. Finally, recharge the AC system and test for proper operation.
To change the evaporator coil in a 2002 Ford Windstar, first disconnect the battery and drain the refrigerant from the AC system. Remove the dashboard and center console to access the HVAC housing. Disconnect the necessary electrical connections and hoses, then remove the screws securing the evaporator coil. Replace it with the new coil, reassemble all components, and recharge the AC system with refrigerant.
The receiver dryer is the can looking thing next to the evaporator.
Inside the HVAC housing under the dash.