Drive the car up onto ramps or jack the car up to change the alternator you need have access from the bottom of the engine. Access to the alternator is very tight. First disconnect the battery. Accessing from the top loosen the drive belt and remove the adjusting bolt, ground wire, battery wire and plug in connector from alternator, do this before removing the bottom bolt from alternator. Once bottom bolt is removed the alternator is to be taken out the bottom, it is a tight but it will come out. Hope this helps.
The Nissan 240SX was brought to America in 1989.
The 1989 Honda Prelude had 4x100mm offset. The 1989 Nissan 240sx has a 4x114.3mm offset...so, it will not fit.
Yes it is, the Nissan 240SX was assembled in Japan and brought to America in 1989.
10w30
130 with ka24e
what year maxima? 1989-1994 on the bottom.. 1995-2000 in the middle..
4.08
4 quarts
>>"What type of valves does a 1989 Nissan 240SX have?" what exactly are you asking? the factory motor for the 240sx's, years '89-'90, is the KA24E, single cam, 2.4 liters, 12 valve. It has two intake valves, and one output valve.
Nissan 240sx HorsepowerIt depends on what year and what engine the Nissan has, usually 1989-1990 have the ka24e which is 140 hp. While the 91-98 have the ka24de engine which has 155 hp.
The United States S13 is the 1989-1994 Nissan 240sx. This includes the hatchback, coupe, and convertable models. The United States S13 is the 1989-1994 Nissan 240sx. This includes the hatchback, coupe, and convertable models.
On 1989-1994 240SX, Top speed only goes to 115mph due to VSS. 240SX is not exactly known for topspeed but stability, and for the motor Torque since it was actually used for Nissan Trucks. 1997 Nissan Hardtop for ex.