The front speakers, in your 2006 Dodge, will measure three inches by four inches. The back speakers will measure six inches by eight inches.
you will have to take all the panels out to back and pull up the cardboard and there are the speakers
I had a very hard time with my back speakers. I had to remove the back seats so I could remove the parcel shelf and speakers. Then I did the same thing in reverse with my new speakers lol. I am NOT looking forward to doing the front speakers/tweeters. Haha Khloe :)
To replace the rear speakers, you have to go in the trunk, look towards upper back section of the trunk and you will see the speakers. The speakers have two black hand-screws that can be unscrewed without tools. It is as simple as this.
Drive to acura dealer. Leava keys Come back in two hours
To replace the back speakers...To get to the speakers you must first remove the grill. There are 3 phillip head screws (plus sign) screwed up through the trunk ceiling. You will need a flashlight to find them. Once removed, you can reach the screws holding in the speakers from inside the car. You don't need to cut the wires at all, I just got mine installed in 5 minutes with the adapter speaker plug, you can get them from Amazon or eBay for 16 bucks. You save a lot of time and you don't mess up the wire system of your car with the black tape and stuff.
The rear speakers on the Toyota Camry require the screws to be removed. The speakers are then disconnected and taken out. The new units can now be installed.
You will need to remove the speaker covers in your 2006 Chevrolet Silverado. Remove the speaker retaining screws. Remove the wiring harness from the back of the speakers. Reverse the process to install the new speakers.
Back seat has to come out and the rear package tray too and then you can get to the bolts that hold the speakers in.
The back package tray will have to come out to get to the bolts that hold them in.
Remove the covers from your 2003 Chevrolet Avalanche speakers. Remove the speaker retaining screws. Remove the wiring harness from the back of the speakers. Reverse the process to install the new speakers.
6 1/2 front doors and back