for the 2.4L LE and BE PT Cruisers, the first thing you need to do is remove the air filter housing by unclipping it. the tricky part is that the battery is held down by a clamp that requires you to remove the main electrical box and base. it looks harder than it is because it is simply two rubber grommets anchored to a metal plate. you can reach your hand underneath and feel for them, then push them upward through the anchor holes to release the base. you will see the clamp that holds the battery in place, just remove the two bolts that are holding it down and replace the battery with a new on and reverse the procedure. hope this was helpful, i spent almost 1.5 hours figuring it out.
A 2002 PT Cruiser was not built with a cabin filter.
You can use a scan tool or disconnect the battery.
A 2002 Chrysler PT Cruiser was not built with any GPS system.
The battery is under the air intake box behind the left headlight. Its not that hard to remove the air box to get to the battery.
The engine number for a Chrysler PT Cruiser 2002 is not on the engine; it is part of the VIN number.
The 2002 PT Cruiser has a 15 gal. tank.
The battery on a 2002 Chrysler Concorde is inside the right front fender.
Chrysler did not build it with one.
A Chrysler pt cruiser does not have a reset.
The main reason to replace the rack is a fluid leak.
It is in the fuel tank.
It is under the passengers front fender you will need to remove the wheel first.
That is not a Chrysler part number.That is not a Chrysler part number.
disconnet the battery.
no such thing on a pt
No, Chrysler does not use reset switches.
The price for a new replacement alternator for a 2002 PT Cruiser ranges from $98 to $145.00, depending the brand and where it's purchased. Chrysler produced the PT Cruiser from 2000 to 2010.
Chrysler does not use inertia or kill switches.Chrysler does not use inertia or kill switches.
Chrysler does not use inertia/reset switches.
Red, 5 year, HOAT type.