Open the arm rest. remove the two screws at the rear of the center console panel, just below the coin slots hiding under the black felt. Remove the screw in the cup holder area. Lift up the center console by raising the rear and pulling backwards slightly to get the tabs out to the front center console. Disconnect the wires to the hatch release and the cigarette lighter. Remove the gear shift knob by prying up the shift pattern cap with a small screwdriver and then pull the T shape metal part straight up with a pair of vice grips. If the T does not move use a large screwdriver to lever against the vice grips to pull the T up. Once the T is out, unscrew the shift knob then lift the center console off and set out of the way. The leather shift boot attached to the console can be removed with 4 screws. The rubber shift boot is visible now over the shifter to replace.
How do I change the dimmer switch on my 1993 corvette?
Turn the knob counter clockwise to remove it and clockwise to replace it. The "boot" is more then likely attached to the console that surrounds the shift lever.
will a 1985 corvette hood fit a 1993 corvette
You may want to check your shifter cables to see if they are operating correctly. Turn on the igniton(but DO NOT start) and have someone shift the car, You'll need to have the hood open and watch the shift lever on top of the trans-axle. If it moves while your helper shifts then you might need to get your transaxle rebuilt if it barely moves or doesn't move at all then you need to replace the cables.
Auto - fill it from the dipstick tube.Manual - remove the shift lever and fill from the top.
Almost 5,700 1993 Corvette Convertibles were produce and sold that year. James
yes
Yes, they are a direct fit. TOM
== ==
I need a diagram to connect at clucth cable from a nissan sentra 1993 4 cilinder stitf shift,
Corvette central
Corvette didnt have a Crankshaft Position Sensor until 96.