Bring it to the dealer and pay for the 1 hour dealer service, plus $14 per bulb - 2 are needed. Otherwise, you need a "trim tool" to pry open the top of the compartment holder; and hope you do it correctly w/out breaking the plastic, then use a screwdriver to release the clock mount, then replace the bulbs, clock mount, and snap the top of the compartment back in place, without doing any damage to the dash or compartment holder.
anonymously
there is no fuse . you have to replace the light bulb by opening the clock.
how do you replace light out radio and clock on 2005 bonnievillie pontiac gxp
There is no bulb, the clock is actually an LCD. The clock will have to be replaced.
pop that console out with a knife or key and then the bulb is a small twist out you'll have to find in a store or online
2007 Infiniti FX35 side marker light bulb replacement: Purchase the correct replacement side marker light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the side marker light bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations.
How do it replace the stop light bulb
I just purchased the service manual and will post this information once I complete my replacement. Take care
Unscrew the latch on the top and twisting the bulb counter clock wise tell the bulb comes out then replace the old one with the new one.
Is the radio playing? If so, it could be the bulb is burned out, or the grounding needs to be checked out. Replace all the fuses even if they seem not blown it worked for me!
You have to start by taking off the grill. Then you need to pull out the whole light houseing. When you have the whole light off its easy from there. Just remember not to touch the light bulb with your fingers.
You can replace the dome light bulb in a 2002 Chevy Cavalier by first prying the dome light cover off of the light. Then, remove the bulb and replace it by twisting the bulb from the socket.