if you are referring to the stock radio... i think you have to take off the front part of the radio... if its possible at all to replace them ==Another answer== I just pulled the front off a spare stock Delco radio from my '96 (a few plastic clips around the perimeter let it come out) There is one obvious bulb behind what would be the station/time display. Getting to it is a mystery as it's behind a plastic shield that appears to be fastened to the PC board. The lights behind the pre-set buttons are not obvious because there is a PC board right behind the front panel of the radio. If I recall correctly, I replaced this radio because A. the station/clock display didn't work, and B. because either the pre-set buttons didn't light up, or maybe just because the plastic coating over them was damaged. I found a used perfectly working replacement on Ebay for about $30.
Here is where I found how to do it. http://users.adelphia.net/~bpaskevich/index_files/Radio_Lamp_repair.htm
THE LIGHTS ON THE RADIO ON THE LEFT SIDE ARE NOT LUMINATED. WHAT DO I NEED TO DO TO FIX THIS PROBLEM?
if the clock is not displaying that is light bulb you can buy on eBay or at a gm dealer.
I have a 1998 Pontiac GT and the light was burned out on the display. Could not find one at the dealership. The place i found one was www.corvetteradios.com. Hope this helps. I had that problem on my GP GT ´97, I pulled out the radio and there´s a small light behind the dispaly, it was burned, I had to replace it. You can buy it in radioshack, you need to weld it.
This link should help. http://www.jeepforum.com/forum/f140/how-2005-2009-grand-cherokee-wk-fog-light-install-867728/
the light in the display is probly burnt out. if you take the radio out you can take the top off it and the light is right at the display. you can take it out with a screwdriver. sometimes the light is just loose and will still work but if you need a new one you can get it at www.corvetteradios.com. hope that will help you out.
Answerpleas go to www.corvetteradios.com and look up what type of GM radio you have, and they will tell you what bulb you need and how to replace it. Second opinion: I have a 2000 P M with same problem & the Chevy dealer told me it could not be replaced. He said they replace the radio.Ye! Sux I know!
how to fix the light for the clock radio in a 2003 Pontiac grand am
how do you replace light out radio and clock on 2005 bonnievillie pontiac gxp
pictures of how to change front signal bulbs on a 2004 grand prix pontiac
i have a 2007 Pontiac grand prix and if you are in el paso Texas it only cost me $60 $50 for the light $10 for the service at the auto shop on dyer
Remove the two 10 millimeter screws and pull the housing down and replace the bulb
remove trim, remove clock, remove clock light harness, and remove and replace clock light bulbs
The license plate light bulb on a 2002 Pontiac Grand Prix is replaced by removing the retaining bolts and pulling the bulb out of its socket. A new bulb is then put into the socket and reassembled.
how to replace map light bulb in a 2006 pontiac torrent
Hey Rick==Simply get to the back of the light assy and turn the bulb counterclockwise to remove. GoodluckJoe
underneith the front bumber twist counter clockwise replace bulb
take the light off and put the other one in you jack@$$
what light, there are a lot of them.