Want this question answered?
The '96 200sx has no fluid for the clutch. This car has a cable operated clutch that needs to be adjusted. If the cable breaks the clutch will not disengage. If the clutch is getting tight it will need lubed. If lubing the cable doesn't work a new cable is needed.
Metal piece was from the end of the clutch cable.
I have replaced the the clutch cable on my '95 200sx 1.6L and it was easy. To adjust the cable go to the end of the cable where it conects to the level looking clutch arm in the engine compartment and look at where the clutch cable connects to the lever. Securing the cable on the backside of the lever there is a washer and screw that you can tighten or loosen to engage the clutch without pushing it all the way to the floor or you can adjust the other way to get the opposite affect. After I installed my clutch cable I had to go back about a week later and adjust the clutch (tighten the cable) because it appeared the cable had stretch a little from brand new to broken in condition. Hope this helps...
Replace clutch cable on sportsbike
the cluth cable is attached to the very top and back side of the clutch pedal by a small hook. Simply slide the hook end of the new cable to it. the other end goes through the firewall located by the stering colume. Attach the other end of the cable w/ the adjustible threaded side to the release lever located on the transmission housing top side. Tighten down the cable w/ a 10mm wrench until the cable is tight anbd your done
It sounds like it is the clutch cable. I have a 94 Nissan Sentra and the clutch cable just broke. I have replaced one on an older Nissan, but it is still difficult for me to do on the 94. It is really hard to get the broken cable out.
I need a diagram to connect at clucth cable from a nissan sentra 1993 4 cilinder stitf shift,
clutch cable replace
It doesn't have a clutch cable. It is hydraulic operated.
To replace a clutch cable fork on an Escort 1.85 diesel, first lift the clutch pedal to release the adjuster mechanism. Pull the cable through and hook the clutch cable fork.
Well cable could be froze up. Replace the clutch cable. If cable is working adjust cable. If the clutch cable is adjusted then it's time for a new clutch
It has an automatic clutch. Therefore it doesn't have a cable.