Want this question answered?
2.0litre
i sound forward and I believe that the 4x4 will clutch on my own and it can not, I do not touch the arm of enbrayage of 4x4 and 4x4 when the arm is diparrait clutch noise, is there a maintenance or adjustment to fix this problem?
front are $ 189.00 ,back are $83.00
The transmission must be separated from the engine, related brackets and lines have to be removed. Loosen the bolts around the pressure plate, the clutch disc will loosen at that time. Be careful as you remove the pressure plate, the disc will fall freely. Use a clutch alignment tool to align the new clutch disc, tighten the pressure plate bolts to specs and re-install the transmission.
replace the housing o ring
where is the location of 98 Kia Sportage 4x4 2.0 liter cam sensor?
Parts,$300 and the book time for a 4x4 Rav is 12hrs as the engine/trans have to come out as a unit to replace the clutch.
yes
i used to have one of these however I upgraded but before doing so I did have to replace the clutch as my lil bro wore mine out I tried a clutch from a rotary Honda that didnt even fit in however I got in touch with Toyota and they sent me a clutch from a 1998 Toyota tacoma 4x4 it worked until it broke and I needed a new one
Get a manual on your car from AUTOBOOKSONLINE.COM They aren't expensive and it will help on the next repair.
this link will give u your answer http://www.ford-trucks.com/forums/647209-4x4-control-module-4x4-flash-problem-3.html
Get your local mechanic to do it on off time. This is such an easy clutch job it'll take about 30 minutes so you can expect a perfect result at low cost.