It's right on top of the engine, next to the thermostat housing. Just disconnect the wire, turn out the sensor and replace it with a new one. If you need to add coolant, add the coolant after you change the sensor. Also, you should be ready with the new sensor as soon as you take the old one out, coolant will most certainly start to flow from the opening.
Type your answer here... where is the coolant sensor ona 2001 chevy prizm
Yes it will leak out of the hole that the sensor is screewed into.
What type of coolant is recommended for a 2002 chevy suburban
It means it's time to replace the coolant temperature sensor.
To the left of the thermostat housing, It screews into the intake water jacket.
Replace the engine coolant sensor.
problem with the coolant sensor check the connection on the sensor reset your OBD I code if that don't work replace the coolant sensor
Just unplug the electrical connector and then unscrew the oxygen sensor out of the exhaust pipe.
That would be the electric switch that is screewed into the intake to the left of the thermostat housing.
It is on the driverside head up front by the #1 spark plug.
The coolant temp sensor on a 2003 Chevy S10 V6 is located on the front of the intake manifold. To replace simply unscrew the old sensor and screw on the new one.
driver side bank 1 before cat