Pop the door panel off. Remove screws including the one behind the window switch. Then, lift up on the panel. You will see where the window switch plugs in.
The button on the driver's door that disables all windows except the driver's window. Push that button and all power will be restored to all windows. If not, that button may be defective.The button on the driver's door that disables all windows except the driver's window. Push that button and all power will be restored to all windows. If not, that button may be defective.
The driver side electric window switch on a 1992 Acura Integra is reached by removing the door panel. Unbolt the switch from the mounting bracket and disconnect the wiring from the harness. Replace the unit.
needs electric motor located underneath glass, behind door panel.
Had to replace mine not too long ago. You will need a very small screw driver to pry the button loose. Once out you are home free! You can find a diagram on how to do this on Smokinvette.com. Good luck!
On the 2010 model, on the driver's door just above the bottom compartment there is a button (which is similar to the electric window button) with a petrol pump diagram. The pull it and the filler cap will open
Button on the driver door panel.Button on the driver door panel.
the driver info button is on the dash tothe right of the steering wheel
pull off door panel to get to the 3 10 millimeter nuts to take the mirror off and if the mirror is electric you have to unplug the wiring at the connector in the door.
The little red button on the driver side is for overdrive.
Dear User, You should be able to open up the side panel fairly easy and you can replace the electric crank with a hand crank. or just fix the electric crank
you set your seat to your required position hold driver #1 button till you hear it beep twice and it is set.
Yellow button by driver's left knee.