This is easy, especially since I have the same car and have done this myself. After opening the hood, you must remove the lid to the air filter housing. To do this, loosen the hose clamp from the end of the air intake hose connected to the air box and remove the air intake hose. Then pull the plastic locking tabs inward and lift them from their slots. After lifting the tabs, slide the lid until the other end is free. Now that the lid is removed you shoujld have better access to the headlight bulb. First make sure your headlights are not on, unplug the socket from the bulb and twist the bulb until it is free to pull out. Once you have removed the old bulb replace it with the new one in the reverse order. Be sure not to touch the bulb with your bare skin or get it dirty. Headlight bulbs produce extreme heat and the oils from your skin will burn into the glass and cause the bulb to rupture in a matter of minutes. If you do touch the bulb by accident, wipe it off with rubbing alcohol and a lint free cloth to clean it.
By removing the locks that hold the headlight assembly in place you can wiggle the headlight assembly out to gain access to the headlight bulbs for replacement.
Remove the headlight assembly to gain access to the parking light socket/bulb.
Take the light assy off of the car and the bulb screws in from the rear.
i wanted to know how to change head light bulb of 99 cavalier
how to replace the headlight light assemble on a 2001 e320
How do you replace the third rear brake light in a 2005 buick allure
It's behind the headlight.
ask someone who knows how to change a headlight on a 1995 Buick riveria
the headlight assembly needs to come out in order to replace the bulb.
How replace right head light
how do you change a back up light bulb on a 2008 buick enclave
To replace the daytime running light on a 2004 Suburban, you will have to first remove the two metal pins that can be found on top of the headlight. The headlight assembly can be removed next. Pull out the plugs that are connected to the headlight assembly. Replace the bulbs and then reconnect the assembly.