First you have to remove the fan shroud which is bolted to the radiator and front cross bracket with 10mm bolts. There should be 4 10mm bolts that hold the fan and clutch to the water pump. What you generally have to do is find a way to hold the clutch fan in place, I have used a large flat tip screwdriver in the past. Then you have to loosen the 4 bolts and remove the clutch and fan as a single unit. Once out of the vehicle you should be able to remove the fan from the clutch unit and only replace the clutch unit itself. Hope that helps a little Michael
There is no fan belt on a Mazda Miata.
Your coolant pump is behined the fan, you will have to replace the water pump.
Not enough info - which fan? The passenger cabin blower fan, or the engine radiator cooling fan?
I just replaced my fan belts on a 2002 Mazda Protege. It came out to a little over $200. I took my car to a Mazda dealership.
the radiator could still be warm or if the car is cool and it runs you need to replace the fan relay switch.
The Pollen filter is between the fan and the engine.
Check fan fuse, thermal relay, fan motor. Replace as necessary.
Location of blower fan on 2001 blazer
The cooling fan relay on a 1998 Mazda 626 is located in the engine compartment near the firewall. It is housed in a protective box with latches.
Your Lumina 2001 engine light might come on while the radiator fan is working because the fan is turning too slowly, is damaged, or is not cooling the engine correctly.
look for your user manual and it should have it in there. if not look around the engine most likely on the cowling for the rad fan or on the bottom of the hood and it should have a diagram.
Replace the fan clutch that is on the front of the engine.