Want this question answered?
how do you replace the expansion valve
The expansion valve is attached to the evaporator core, behind the center of the dashboard. Look under the hood and locate the point where the A/C lines go from the engine compartment to the passenger compartment and on the other side is the evaporator core. Good luck my friends.
how do I replace the AC expansion valve on a Mercedes C280 sedan. location and procedure
The PCV valve on a 1995 Buick Park Avenue is located on the top of the valve cover. Twist the valve and pull to remove and replace it.
How do you replace evpansion valve on 99 gs 300
The best way to fix an expansion valve for the A/C system is to replace it. of course then you have to evacuate and recharge with freon.
The expansion valve is found inside the evaporator housing. To replace the AC system needs to be flushed legally. Then valve is only held down by a few mounting screws. Once the AC system is bled, loosen the screws and replace the unit.
Remove the bottom hose from the evaporater at the firewall, pull out the expansion valve, i highly recommend flushing out the system to remove excess sludge. Replace the valve and the hose.
yes it can because sometimes you need to replace them
Expansion valve is located on the A/C Evaporator Core. Most of the times you have to remove the whole dash to reach it/ replace it. Good luck.
In the rear of the vehicle attached to the rear evaporator, you will need to remove the complete assembly to replace the expansion valve......
The expansion valve is located in the lines connecting the evaporator core which is located inside the evaporator housing behind the dash and the glove box.