0
How do you replace the front bearing hub on a 1998 Pontiac Bonneville?
Wiki User
∙ 17y ago
Remove tire, remove brake caliper, and brake rotor. There are three bolts tat hold the hub assembly to the steering knuckle, either from the front or the rear If they are in front there are holes drilled in the hub and you can pass a socket through to loosen them. Remove the axle nut socket from the front center of the hub and push the CV shaft inward to get some slack. Pound a chisel between the hub and the knuckle to separate. Reinstall the parts the way they came off and torque the axle nut to 150 ft/lbs and the lug nuts to 100 ft/lbs
Wiki User
∙ 17y ago
Add your answer:
Earn +20 pts
How do you replace front fender 98 Pontiac Bonneville?
How do you replace passenger side fender on a 1998 pontiac bonneville se
How do you change a front fog light in a 1996 Pontiac Bonneville?
'How do you change a fog light in a 1996 Pontiac Bonneville? ... How do you
How do you replace Pontiac vibe front wheel bearings?
The front wheel bearings, of a Pontiac vibe, can be replaced by first removing the front wheel. Next, remove the axle end cap. Remove the bearing and reverse the process to install the new bearing.
How do you replace a supercharger belt on a 1997 Bonneville?
You will need to remove the front engine cover, on your 1997 Pontiac Bonneville, in order to change the supercharger belt. Loosen the tensioner pulley to remove the belt.
How do you replace front shocks 1992 Pontiac Bonneville?
take the two bolts out of the bottom of the a frame and the one bolt from under the hood then drop it down
What size are the front door speakers in a 1993 Pontiac Bonneville?
4x6
Where is the fuel filter on a 1996 Pontiac Bonneville?
If the Bonneville is like my GTP then the fuel filter is in front of the fuel tank
How do you replace the front wheel bearing on a 2003 Pontiac vibe GT?
Take off the steering knuckle and press out the bearing and hub.Have the new bearing pressed in with the hub and re install the knuckle.
How do you change the front wheel bearing on 1993 Pontiac Bonneville?
On the hub.. that you need to replace because you cant just get the wheel baring for the bonneville... you got 3 bolts that need to come out you take them out you get the hub out... put the new hub back in put the 3 bolts in there and put your tire back on. Then there ya go you jus changed your wheel baring.
How do you take off a front motor mount on a 1993 Pontiac Bonneville?
yes
Where is the fuel filter on a 2001 Pontiac Bonneville?
in front of the left rear tire
Where are ABS Sensors located on 2001 Pontiac Bonneville?
front hub assembley front hub assembley
