Remove the two belts going to the crankshaft pulley, remove the crankshaft pulley, remove the pastic covers. Your need to take the timing belt off make sure to aline all timing makes including the balance shaft marks and oil pump. There a small sproket/gear u need to pull out behind the seal is use a pick to take it out. Once you have it out clean the sides of any dirt. To install the new one find a socket the size of the seal put a little bit of grease, aligne the seal were it goes tap it in slowly. Make sure sits evenly. Starts to assemble everything back in the reverse prosses and remember your timing marks are right. Good look also get a repair manuel
How to replace left front door actuator on a 2005 honda accord hybrid
Is it the back one or is it the front one...?
It is about $300 to $350 in Flushing NY
too much
Front studs on a 1999 Honda Accord are pressed in. First the studs must be removed using a hammer or press. Once remove each stud can be pressed in.
The 2001 Honda Accord has 54.9 in. of front hip room.
The 2013 Honda Accord has 58.6 in. of front shoulder room.
The 2014 Honda Accord has 58.6 in. of front shoulder room.
The 2006 Honda Accord has 42.6 in. of front leg room.
The 2008 Honda Accord has 58.2 in. of front shoulder room.
The 2012 Honda Accord has 56.6 in. of front hip room.
The 2003 Honda Accord has 40.4 in. of front head room.