Want this question answered?
trouble putting right front signal bulb in.
on what car
you will have to take that into a dealer and have them make the repairs
You have to unscrew front right engine mount from bottom and lift engine (not remove).
Check the fuse for the wipers and replace the turn signal bulb.
Get a creeper and go at it from the bottom, all of what you need is right there.
i need to replace a throttle sensor and put a throttle body rebuild kit in
One of the front blinker bulbs is burnt out. Replace the bad bulb and the blink should function normaly. you have a front right turn signal bulb that is burned out. the resone it blinks fast is there is less load on the flasher .
First pop your hood. After you raise the hood, and your looking at the front headlights. Directly above the headlights. In each corner of the headlight is a screw. remove that screw and pull the signal light right out. turn it over to replace old bulb. Once your done reinstall turn signal. Then tighten screw back!
The turn signals are located on the left side of the steering wheel on the 1985 Mercedes 500SEL. You can turn the signal up or down to point the direction of the signal to turn left or right.
Reach behind the bumper of the 99 Cavalier. There are two nuts that hold the turn signal assembly in. Remove the nuts to take the assembly off and replace it.
1998 Mercedes-Benz C230 turn signal light bulb replacement: Purchase the correct replacement turn signal light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the turn signal light bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).