answersLogoWhite

0


Best Answer

To replace either of the smaller bulbs in the Headlight assembly of the 2000 CRV you need to remove the headlight assembly. Each side is the same, except, of course, mirroring the other side.

Tools required: #2 phillips screwdriver and a 10mm socket wrench.

1. Open the hood and remove the 2 nuts holding the top of the headlight assembly.

2. Follow along the front rim of the engine compartment where the two nuts were toward the center of the car and remove the next 4 screws which hold the top of the grill in place. There is ONE MORE SCREW. Look down in the hole where the hood latch goes and loosen but don't remove the last grill screw. The grill should slide forward and come off. You'll find a nut holding the inside of the headlight assembly. Loosen but don't remove.

3. Follow the bottom edge of the rubber front bumper to the point where the bumper connects to the wheel well. There is a screw screwing up into the fender holding the end of the bumper up in place. Remove the screw and the end of the bumper will flex down exposing the head of a nut just under the front edge of the fender. This is the 4th and last screw holding the headlight assembly. Remove it.

4. The headlight assembly should lay forward enough to twist and remove each of the lights in the assembly.

Please reverse the process for reassembly.

User Avatar

Wiki User

11y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you replace the front turn signal bulb located on a 2000 Honda crv?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you replace the front turn signal bulb located on a 1997 Honda Accord LX?

twist from the back. pull out old bulb.


How do you replace the front turn signal bulb located on a 2001 Buick Century?

How do you replace the front turn signal bulb located on a 2001 Buick Century?"


How do you replace the front turn signal bulb located on a 1998 Honda Civic EX?

First you have to take off the front bumper. Then there are three screws you will have to undo in order to take out the entire headlight housing to then get to the turn signal.


Changing front signal bulbs on RSX?

Front signal bulbs on a RSX are changed from the engine bay. Find the lightbulbs for the signal bulbs located towards the bumper of the vehicle. Pull them out and replace them.


Where is the horn located on a 1987 Honda Civic Wagovan?

I had the same problem. . . I finally located the horn behind the passenger side front turn signal.


How do you replace the front turn signal bulb located on a 2000 Pontiac Firebird 3.8L?

HOW DO YOU GET THE LEFT TURN SIGNAL BULB OUT ON A 2000 PONTAIC FIREBIRD


How do you replace the front turn signal bulb located on a 1998 Chevy S-10?

The front turn signal assembly will pop out with a little help. It is held in place by clips that snap it into place.


How do you replace the front turn signal bulb?

trouble putting right front signal bulb in.


How do you replace a front turn signal bulb for a 2000 sts Cadillac?

How do you replace a front turn signal bulb for a 2000 sts cadillac?"


How do you replace the front turn signal bulb located on a 1995 Saturn SC2?

Open the hood it pops into the backside of the lens.


How do you replace the front turn signal bulb located on a Honda CR-V?

Its harder to replace the side and indicator bulbs on a crv 01 plate remove grill then remove bumper then remove light cluster then replace bulbs. A lot of work for little bulb you would think it would be easy but it aint............


How do you change the front turn signal bulbs on a 1992 Honda Prelude?

Corner signal glass is secured with 1 screw towards front of the car. Remove screw and drag the corner glass straight forward. Now you should be able to release the front signal glass. Replace bulbs, put back together.