Head Gaskets and Valve Covers
Acura Legend
Chevy Cavalier Z24
1982-1994 Chevy Cavaliers

How do you replace the head gasket located on a 1998 Acura Legend?

323334

Top Answer
User Avatar
Wiki User
2010-11-27 03:13:57
2010-11-27 03:13:57

"Considering that there is no such thing as a 1998 Acura Legend, I would dare say that it is impossible."

I have a 1988 Acura Legend LS and I am dealing with the same issue. If you figure it out, help me out!

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

how to replace a water pump on a 1991 acura legend

User Avatar

how to replace rear shocks on a 1994 acura legend coupe

User Avatar

how do u find and replace a 92 acura legend thermostat

User Avatar

if its an 88 acura legend then you will need to remove the couple of bolts that hold it down and take it to the local auto store. like other cars you can just replace the bulb but on these acura you need to replace the whole headlight unit

User Avatar

Take it to a mechanic nobody can tell you how to replace a head gasket over answers.com it requires someone who knows how to rebuild engines when a head gasket blows it requires the engine to be disassembled and rebuilt.

User Avatar

how to change head gasket on 1997 acura

User Avatar

How do I put a alternotor belt on a 1991 Acura Legend

User Avatar

"Where is cooling fan relay on 94 acura legend?"

User Avatar

diagram of where the water pump is located on 1994 acura legend v6 diagram of where the water pump is located on 1994 acura legend v6

User Avatar

The signal flasher on a 1987 Acura Legend is located under the fuse box. This is on the driver's side under the dashboard.

User Avatar

How do you bleed the cooling system of a 1988 acura legend? Is there a bleeding screw and where is it located?

User Avatar

In order to replace a clutch on 1989 Acura Legend, you would have to remove the old one. You will do this by removing the jam nut that holds the pedal and disconnecting it from the throttle cable and replace it with a new one.รŠ

User Avatar

The map sensor for the 1991 Acura Legend is mounted on the firewall. It is in a box near the factory strut brace.

User Avatar

YOu might have a cracked head gasket- that what caused mine to do that

User Avatar

The way to replace the thermostat on a 91 Acura Legend Coupe is to drain the radiator and remove the throttle and cable box. Remove the top of the radiator hose and the bolts. The thermostat will be inside.

User Avatar

Acura Legend was created in 1986.

User Avatar

The thermostat is located at the back of the engine near where the radiator hoses attach. There is a housing held in by two bolts. It may be necessary to remove the air cleaner housing to access it. The new thermostat from Honda comes with the gasket and can only be installed one way (with the pin up).

User Avatar

The 1991 Acura Legend does not have an oil temperature sensor. It does have an oil pressure sensor. The oil pressure sensor will be located on the left-hand side of the engine.

User Avatar

Replacing a 1992 Acura Integra head gasket will cost approximately $500. The exact cost to replace the head gasket is dependent upon several different factors.

User Avatar

Why 1988 acura legend downshifts


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.