It takes 2--#921 bulbs which are 18 watts, about $2 bucks each at Pep Boys in my area.
With a putty knife (my choice) or screwdriver, pop off the top of the high deck tail light. It is 'snapped' on and comes off easily. Replace the bulbs (check them by stepping on brake) and insert the window side lugs of the cover back into their slots and push down on the interior lugs. Job done!
remove bulb from in side the boot
you dont you get a new car
y
If you grab the light and pull it straight twards yourself it will come off. The bulb is in there
the headlight assembly needs to come out in order to replace the bulb.
Remove the dome light lens, pull the old bulb out, and replace with new bulb; replace the lens.
Replace the bulb that is burnt out.
unscrew the 2 screws holding the light in. pull the light out. replace the light.
1998 Lexus ES300 turn signal light bulb replacement: Purchase the correct replacement turn signal light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the turn signal light bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
To replace the parking light bulbs, remove the screw on top of the headlight and pop out the clearance light. The parking light bulb will be accessible after this removal.
yes you do
To change brake light bulbs on a 1998 Lexus ES300, open the trunk lid. Locate the plastic rivet on the side of the trunk liner. Turn the rivet while pushing in with a screwdriver. Remove the rivet and the trunk liner can be pulled away to access the bulb. Push in and turn the bulb to remove. Insert the new bulb the same way. Replace the rivet in the trunk liner.