It is impossible to remove the valve without taking off the intake manifold that it is bolted to.
Remove all of the various hoses and electrical wires that are connected to the intake manifold.
Remove the accelerator and cruise control cables from the throttle body.
Remove the distributor cap and allow yourself access to the throttle body and detach that.
Next, take the two spark plug wires closest to the firewall off of those spark plugs but leave all wires connected to the distributor cap.
Unbolt the manifold with a star bolt (don't remember the size).
Turn the manifold upside down and you'll see the valve bolted onto the underside slightly obscured by a few pipes which are easy to disassemble.
While everything is off, clean the throttle body and the air intake manifold with carburetor cleaner.
Put new valve on and put everything back in reverse order. Remember to put a new manifold gasket and I don't remember the torque values for the manifold bolts.
Take your time, it's really not too bad.
A 1999 Dodge Ram does not have a water control valve.
on the side of the valve cover on the drives side.
its screwed in the right hand side of the engine
replace the leaking component
How do i replace the purge valve on a 1999 Chevy Monte Carlo
under the vehicle, close to the oil pan.
The PCV valve for a 1999 Regal 3.8 is located on the top of the valve cover. The valve pulls out to replace it.
There is a heater control valve on the 1999 Ford Ranger. There is no thermal vacuum valve on this year of the vehicle.
http://forums.maxima.org/infiniti-i30-i35/589286-how-remove-fog-lights-96-99-i30.html
Replace the starter
I'm Trying To Change The EGR valve ON My 1999 Nissan Quest How Difficult Is It Going To Be, Please Help
yes