Actually, the High and Low beam are separate bulbs. To replace the low beam, first you must disconnect the wiring harness from the bulb. To do this, depress the tab at the bottom of the connector and pull down on the connector. You may need a flashlight and a long flat screwdriver in order to press the tab at first, then you should be able to press down on the tab with your finger and pull down on the connector at the same time. (You may want to practice first on the High beam because it is easier to see and access) Once you have the harness connector released from the bulb, twist the bulb counterclockwise 1/4 turn to remove the bulb from the housing. When installing the replacement bulb, use care so as not to touch the glass with your fingers. (I recommend wearing vinyl or latex gloves) Press firmly toward the housing as you rotate the bulb 1/4 turn clockwise. When you reconnect the harness you should hear a soft click when the locking tab engages the new bulb.
How do you replace the dash lights on a 2004 Nissan Quest
We just had this issue with our 2004 Nissan Quest SE, we had to purchace the whole wheel hub assemby from Nissan for about $195.
Raise the hood. Remove the whole headlight unit. Nuts are reachable from inside. Not too difficult pc
The 2004 Nissan Quest has 24 valves.
The 2004 Nissan Quest has a V6 engine.
The 2004 Nissan Quest is a gas-powered vehicle.
The 2004 Nissan Quest has a 4-speed automatic.
The maximum payload of the 2004 Nissan Quest is 1720 lbs..
The 2004 Nissan Quest has double overhead cam (DOHC).
The 2004 Nissan Quest has a 20 degrees angle of departure.
The height of the 2004 Nissan Quest is 5 ft. 10 in. (70 in.).
The 2004 Nissan Quest's turning circle is 40 ft..