Well you have to take the door apart... First take off the door panel, disconnect and remove the door speakers, then you'll most likely have to drill a hole in the bottom of the door frame to get a screw driver in to unscrew the window motor + mount (as it is 99% likely that your door frame was welded shut during manufacter). Once all this is done it's easy as pie, just unscrew the old one, disconnect it and remove through speaker hole. Then to put the new (or used - I'd suggest on a car this year just getting the whole motor with mount from a pick-your-part, you can test them with a tester if you have one or simply get a few and test them all before you put your door panel back on) one in just connect it, screw it in, connect and replace your speaker and replace door panel. If you want to replace only the motor and not the mount for it you have to unscrew the motor off the mount after you've pulled it out of the speaker hole.
how to replace1994 grand drivers side power window motor
Begin by removing the inside door panel of your 2001 Mercury Villager. Remove the window motor wiring harness. Remove the window motor linkage. Remove the window motor retaining bolts. Reverse the process to install your new window motor.
Just use a flat head screw driver to pry it off.
for what car? 2000 gm s15
How do you remove and replace the motor for the drivers side power window in a 2000 Sienna
Buy a chilton's or haynes maintenance manual. They tell you everything. I had to replace my drivers side window motor. Not too hard.
replace the power window motor inside the door. You will have to drill out the rivets and replace with nuts and bolts
First... get a repair manual. Follow the instructions...
you need to replace the window master switch
check on eBay for a power window motor. from what i have heard its only 1991 -1994 mercery capri only
video on how to replace window lift motor on j30
Replace the window regulator, it may come with the motor.