Want this question answered?
In the 2001 Toyota Corolla the evap purge solenoid valve is located near the underside of the air cleaner. This is an emissions control device.
You need to replace the Purge Solenoid Valve.
where is purge solenoid on 2006 Chevrolet Colorado
where is the purge solenoid valve on my camry 2001 6cyl
Purge solenoid is on the gas tank along with the evap cannister.
purge or vent solenoid for what ? Kia sporatage does not have one.
The 2003 Kia purge valve solenoid is located on the firewall in the engine compartment. The purge valve solenoid will be on the passenger side of the firewall.
Remove the engine sight shield. Remove the evaporative emission (EVAP) line from the canister purge solenoid, perform the following: * Push the large size white retainer portion in. * Push down, while pulling up slightly in order the disengage the tube. Disconnect the EVAP canister purge solenoid electrical connector Remove the EVAP canister purge solenoid bolt Remove the EVAP canister purge solenoid and insulator Reinstall in reverse order....... toque spec is 91 inch lbs
It must be on the charcoal canister. the charcoal canister should be located in the back of the car near the fuel tank.
The canister purge solenoid draws gas fumes out of the charcoal canister
The purge flow is a term used in the evaporation system....or the emmisions system. There is a puge valve that is solenoid controlled. The vapors purge into the intake while the car is running. if you get this code and your gas cap is tight. something is amiss with the fuel system tightness.
The computer on the car purges the evap canister automatically by activating the purge solenoid.The computer on the car purges the evap canister automatically by activating the purge solenoid.