find the hose you want to replace. on that hose will be a hose clamp on each end. take them loose and remove the hose. when you go to put the new one on put some dish soap in both ends this will help it slide back on. make sure you have the hose clamps on the hose.
Drain enough of the radiator to remove the top radiator hose. Remove the hose, then the pipe that the hose connects to. The bottom end of the pipe houses the thermostat.
lower hose is on left bottom of radiator. passenger side.
The thermostat on a 2009 Chevy Malibu with a 3.5L engine is located where the lower radiator hose connects to the engine. Labor manual states 1.0 hrs. Drain radiator. Remove plastic intake hose. Remove upper radiator hose. Remove lower radiator hose. Remove 2 10mm bolts from thermostat housing. Replace faulty thermostat. Reverse procedure for reinstall.
Remove the coolant from your 1997 Chevy Malibu radiator. Remove the bottom radiator hose. Run water through the top of the radiator allowing it to run out the bottom.
It is located where the upper radiator hose connects to the engine.
blown brake hose, front passenger side in 1997 chevy malibu?
just follow the upper radiator hose to engine, and you will find it.
Should be in housing at engine end of upper radiator hose
Try in housing at the engine end of the upper radiator hose
The 1981 Chevy Malibu 350 engine thermostat is located on the front of the engine. You can follow the water supply hose from the radiator to the thermostat.
Should be in a removable housing at the engine end of the upper radiator hose
bottom corner of the radiator, engine side, usually opposite side (driver/passenger)of the lower radiator hose.