Should junction over the rear axle and connect sto the wheel cylinder - after replacement line will have to be bled
take the old one off, put a new one on.
Length of back brake line to replace. hole in it between front and back door
Replace and bleed line
blown brake hose, front passenger side in 1997 chevy malibu?
Each brake line is held in place with a swivel nut at each end. Turn the swivel nut to the left. The brake line will come off.
Jack that wheel up off the ground, Then loosen the rubber brake line up on the brake cailber and see if wheel will turn free, If it don't then replace cailber. If it does then replace the rubber brake line that is on the cailber. After you jack the wheel up pump the brake pedal real good before you loosen the line up.
How do i replace brake lines on a 2000 grand am
located on the transmission bell housing. Should be 2 bolts holding it, and a brake line to it. Lossen the brake line while it is still attached to the transmisson. Unbolt it, and replace. The rod that connects to the slave cylindar to the clutch fork will probably be reused. You will need to bleed it as you would the brakes.
When a brake line is leaking on the Chevy Venture the brake line should be replaced as soon as possible. A leak, however small, can cause hydraulic fluid to escape the brake line which will cause a loss in brake pressure. The brakes should be bled of air after the new line is put in to remove gaps in brake pedal pressure.
measure affected line
The cost to replace a leaking brake line on a 1996 Chevy 1500 truck can vary. For example if you can purchase the part used the cost can be as low as $100. However, the cost to have the service work completed on the part can also increase the price depending on the mechanic prices.
Replace the brake line, bleed the brake. top up with brake fluid. Done.