After you remove the two screws in the back panel, the have to pull the assembly. The best way for me to describe it is, you have to move to the side of the truck and pull the assemble towards you. You cannot pull it straight back. There are two pins that allow the light cover to be secured against the back of the truck. One pin is towards the top, the other pin is towards the bottom. I used a screwdriver to GENTLY help me pop the pin inserts out.
How do you change the tail light on a 2001 toyota sequoia
No
how to change tail light bulb on Toyota sequoia
2001 Toyota Sequoia turn signal light bulb replacement: Purchase the correct replacement turn signal light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the turn signal light bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
Vehicle stability control
Check the signal light fuse, the signal light relay, and the signal light switcher.
On a 2012 toyota Highlander, How do you replace tail light Assembly
The signal light switch, on your Toyota Camry, can be changed by unplugging the signal relay switch. Plug in the new relay switch.
The flasher relay in Toyota Wil is in the signal light.
Unscrew the screw that attaches it to the headlight. Pop it out. Twist bulb so it comes out.
Had same trouble with my 04 Sequoia.. Flushed and change transmission fluid and had no more trouble..
Put some air in the tires.