Want this question answered?
The 2005 Hyundai Tucson has a proprietary rear wiper blade that you can only get at the dealer. While buying the part, ask for assistance/instructions on how to change it. You may also want to check your manual.
The rear wiper blade is a 20". It would really surprise me if the 2007 took a 20" blade, I know the 2005 takes a 12" blade. This is a special Hyundai rear wiper blade and you must go to the dealer to get it. See sources and related links below for information on the front wiper blades. P/N - 98820-2E000 - about $12 at the dealer
The 2008 Hyundai Tucson wiper blade sizes are 24" drivers and 16" passenger side wiper blades. See sources and related links below for more information. Since there are over 22 different wiper arm attachments, do not buy wipers just by length only. Be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.
Most if not all Hyundai Sonatas have hook end wiper arms which are easy to change, replace, remove and install. See sources and related links below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.
The 2000 Hyundai Tiburon has the most common hook-end wiper arms. See sources and related links below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.
It is easiest to replace the back wiper blade by carefully prying off the cap at the bottom of the wiper and then remove the whole wiper arm. After that you will be able to easily replace the wiper blade per the instructions given by the wiper blade manufacturer. Once you have done that, simply reattach the arm and snap the cap back in place. This process will take you less than five minutes.
To replace the rear wiper blade on a Chrysler Pacifica, you must first remove the old blade. You can remove it by pushing the small blade that holds the wiper in place up, and push the blade back. Once the blade is free from the hook remove it. Put the new blade in position so the hook is in position to go over the wiper attachment. Clip it into position and you are done.
Take a close look at how the wiper blade is attached to the wiper arm to get a visualization of the attachment type. Then see sources and related links below for wiper blade installation videos.
The Lexus rear wiper blade size is a special 14" rear wiper blade that is very simple to replace once you find a replacement. Unfortunately, most stores do not stock this special rear wiper blade so please see Sources and Related Links below for more information on the wiper blade and installation videos. Once you get the wiper blade, there will also be step-by-step instructions on the packaging.
how do you replace a wiper motor in a 2000 jetta?
Raise the wiper blade and hold. Pull the release on the bottom of the blade and wiggle it off.
Once you get the correct rear wiper blade, its literally a snap! The wiper blade is tough to find, however see below. Also see below for an installation video.