How do you replace the right turn signal lens in the bumper on a 1996 Honda accord?
There is a screw on the side of the signal, you can reach it through the middle of the bumper. unscrew that and the whole signal will come out of the bumper. pop the clips and then the lens will come off
Is it true that to remove the bumper of a 2002 Honda Accord the latches that hold it on have to be broken?
Where is the transmission fluid temperature sensor on a 1998 Honda Accord and how do you replace it?
Is this the side marker or is it in the bumper, to replace the light in the bumper, you need a Philips screw driver, and on the inside side of the light, there is a little hole in the bumper, stick it in and loosen the screw. After that the lens should come right out and you just need to twist the fixture and the bulb will come out the back. after that the bulb…
yes it does fit...94-97 have the same bumpers. Someone else answered the above statement. I answered below, and have actually done this. 94-95 have the same bumper, pretty much exactly. 96-97 has a different bumper, but it can fit on the 94-95. A 96-97 bumper can also fit a 94-95 bumper. The bumper brackets are different though between the two models. Whatever year the bumper is for, get that same year bracket.
If your refering to the one that's in the front bumper it should be like this. As your looking at the light housing go to the side of it towards the grill. Look through the bumper holes and you'll see a white tube, inside of that is a Phillips head screw. You'll need a long handled Phillips for this, but that's all that holds them.Good luck