Want this question answered?
Replace the belt and buckle as one unit.
The parts of a belt buckle are the prong, buckle and belt.
chain.
With some belts there are clips in the reverse side, which you can use to change the buckle. What do you do if the belt you want doesn't have clips? Well I cut the stitiching or remove the rivets, depending on which the belt has, then replace the buckle and refasten it with safety pins, or if you have a thinner belt you may prefer to staple it. Hope this helps.
Best to go get a used one & replace it
how to replace drive belt 2003 Toyota matrix
How do you replace the timing belt on a 2003 Mitsubishi Lancer?
need diagram of the sepentine belt and how it go on.
I don't see how you could install just the buckle. I suggest you go to almost any salvage yard and get a replacment belt/buckle assembly. Replace the whole thing.
The belt usually has a clip or ring that is on the left side (as it's worn) of the belt buckle. Before putting the belt on, put the length of the belt through that clip, then put the belt on. The small nub you'll find on the right side (as it's worn) of the belt buckle will go into a free hole to keep the belt buckle in place. If you have a detachable belt buckle such as a western belt, then the belt and the buckle are sold separately. If that is the case, then the belt will have a snap that will open the end. The buckle has a metal ring on the inside that the end of the belt will go through.
It cost me $183 at a private garage in Toronto, Ontario Canada (May 2012).
The buckle.