Want this question answered?
It should have a spring loaded automatic tensioner, if the spring is broke replace the tensioner arm assembly
spring loaded tensioner does not get tightened. id belt is loose either the belt is stretched and needs replacing, or the tensioner is worn out and needs replacing
Its on a spring loaded tensioner. Usually a wrench or socket extension(square) will be able to let you turn the tensioner to release the tension on the belt
It uses a spring loaded belt tensioner I believe. The tensioner is automatically set. IF there is not enough tension, then replace the tensioner. The belt may be stretched and need replacment however.
There should be a spring loaded tensioner pulley. If the pulley isn't holding the belt sufficiently tight you may need to replace the tensioner.
It uses a spring loaded belt tensioner. The tensioner is autmatically set. IF there is not enough tension, then replace the tensioner. The belt may be stretched and need replacment however.
There is a spring-loaded tensioner that you must move with a ratchet to relieve the belt tension. Before you do, look at the tensioner and verify that it isn't falling apart. If it is falling apart, replace it.
There is only one belt, the serpentine belt. You use a wrench to loosen the spring loaded tensioner and remove and replace, there is no timing belt it has a chain.
replace the spring loaded belt tensioner as it's the only thing that will keep the serpentine belt tight.
it is a spring loaded pulley that keeps a constant pressure on the belt
The hex head looking bolt DOES NOT GET TURNED AT ALL...The tensioner is spring loaded...FIND the CORRECT bolt to release the spring pressure. My daughter has a 1995 Mustang (3.8,v6) the spring loaded belt tensioner has a square hole that should fit to a 3/8 ratchet or extension . Then just attach to a breaker bar and relieve tension ,it helps to have someone you trust hold the breaker bar while you change the belt. Most likely though the tensioner can be locked up due to corrosion inside the bushing /bearing area. In that case buy a new tensioner before performing the belt change. Napa by me has the tensioner for about $30.
you dont.it has a spring loaded belt tensioner